Solar battery retrofit explained
Usually, yes. The important question is not simply whether a battery can be connected, but which design preserves the value of the existing system.
The right answer depends on the inverter, FIT or SEG arrangements, grid permission, equipment location, monitoring and the reason you want storage.
Guide checked: 21 September 2026
The short answer
An AC-coupled battery can often be installed without replacing the solar inverter. It uses a separate inverter to charge and discharge the battery on the home's AC electrical system.
Alternatively, the existing solar inverter may be replaced with a compatible hybrid inverter so that panels and battery share one platform. That can produce neater integration, but it is not automatically the better financial decision.
Compare the additional equipment cost, remaining inverter warranty, conversion losses, FIT metering and long-term support before removing equipment that still works.
Two common routes
The existing solar inverter continues converting panel DC into household AC. A separate battery inverter then charges the battery from the AC system and supplies energy back to the home.
This is often the least disruptive route for older solar, mixed brands and FIT installations. It may involve additional conversion losses and separate monitoring.
A compatible hybrid inverter manages both the solar array and battery. This can simplify control and monitoring and may be attractive where the old inverter is approaching replacement.
Compatibility, string voltages, MPPT layout, warranties, metering and grid approval must all be rechecked.
Before requesting quotations
| Check | Evidence | Why it matters |
|---|---|---|
| Solar inverter | Manufacturer, model, rating, age and warranty | Determines compatibility and whether replacement is sensible. |
| Solar array | Panel model, number, strings and original design | A hybrid conversion must remain electrically suitable. |
| FIT or SEG | Tariff documents, licensee and export arrangement | Storage may affect metering or the evidence required for payments. |
| Grid connection | G83/G98/G99 paperwork and any export limitation | The DNO assesses the combined inverter arrangement. |
| Electrical supply | Main fuse, phases, meter and consumer-unit condition | Charging power and installation method depend on the supply. |
| Equipment location | Dimensions, access, temperature, clearances and route | A technically suitable battery still needs a compliant position. |
| Electricity use | Annual total and, ideally, half-hourly pattern | Capacity should follow the energy that can actually be shifted. |
| Objective | Solar capture, tariff charging, backup or all three | Different objectives produce different designs. |
FIT installations
Battery storage does not automatically cancel a Feed-in Tariff accreditation, but the connection and metering arrangement can affect how renewable generation and export are demonstrated.
A battery that can charge from the grid creates an obvious accounting question: the FIT scheme must not reward imported electricity as though it were newly generated renewable power. DC-coupled alterations can also change what passes through the generation meter.
Before work begins, provide the FIT licensee with the proposed schematic and obtain its requirements in writing. Keep the response, commissioning records, photographs and meter readings.
The homeowner needs written confirmation for the actual design, not a general verbal assurance from a salesperson.
DNO and inverter capacity
The installer must assess the existing solar inverter together with the proposed battery inverter. Depending on the equipment ratings and control arrangement, the project may follow G98, G99, a recognised fast-track process or another DNO route.
An export limitation can restrict what reaches the public network, but it does not mean the inverter itself disappears from the grid-connection assessment. Approval and notification must match the installed equipment.
Ask for the DNO submission or notification and keep the acceptance with the system records.
Battery-only installations
A battery can charge during a cheaper tariff window and supply the home when electricity is more expensive. This can be useful where solar is impractical because of roof condition, shading, lease restrictions, planning constraints or building sensitivity.
The financial case depends on the complete tariff spread, round-trip losses, standing charges, battery degradation and installed cost. Cheap overnight electricity alone does not guarantee an acceptable payback.
A suitable tariff and reliable automation are central to the design—not optional extras to consider afterwards.
Backup power
Ordinary grid-connected inverters must stop energising the grid during a power cut. Backup requires an approved EPS or islanding arrangement, suitable circuits, protective equipment and a design that respects the battery and inverter power limits.
Some systems support selected essential circuits; others can support a larger part of the property. High-power loads may still be excluded.
Monitoring and compatibility
An AC-coupled retrofit may leave the original solar monitoring in place and add a separate battery platform. That is less visually tidy, but it can preserve a healthy existing inverter and its warranty.
Accurate battery control normally needs measurement of household import, export and solar generation. Confirm how CT clamps, meters or third-party integrations will work and what happens if internet access is lost.
Do not assume that products from different manufacturers will share data or coordinate simply because both connect to Wi-Fi.
Does the retrofit pay?
The battery investment should be tested against the extra savings attributable to storage: more solar self-consumption, tariff arbitrage, export strategy and any backup value the homeowner genuinely places on it.
Do not credit the battery with generation the existing panels would have produced anyway. Include conversion losses, degradation, possible inverter replacement and tariff uncertainty.
If the household exports little solar and has limited peak-period demand, a large retrofit battery may sit underused.
Related guidance
Start with a survey
A proper assessment checks the existing array, inverter, meters, electrical supply, DNO records, equipment location, cable route and household load before recommending new hardware.
Keep the paperwork
FIT, SEG and DNO treatment depends on the actual design and account. Obtain written confirmation from the relevant organisations before alteration where required.